Viavi OneExpert CATV User Manual page 56

To add a WiFi network profile
1 Verify that network connectivity is enabled (see
connectivity on page
2 Go to the System menu (see
Network.
The System Network menu appears.
3 Select the WiFi button at the bottom of the menu.
Your instrument immediately scans for WiFi networks, and lists each
network as an item.
4 Touch Add Network.
The Add WiFi Network menu appears.
5 Specify the following settings:
Setting
SSID
Password
Key Management
27).
System Menu on page
Value
The SSID (Service Set Identifier) of the WiFi
network.
The password required to authenticate to the
network. A password is not required if Key
Management is set to None.
Open, WEP, or WPA/WPA2 Personal
OneExpert CATV User's Guide
22121055-001, Rev000
Chapter 2 Utilities
Establishing network connections
Enabling network
17), then touch
Page 33