Viavi OneExpert CATV User Manual page 70

3. Verify the ONX has a valid IP Address.
a From the System menu (see
Network.
b Check the IP addresses displayed.
i The ONX IP address is configured as 192.168.0.*
ii The Gateway should be configured as 192.168.0.1
4. From the System menu (see
Strata-Sync icon.
The StrataSync settings menu appears.
5. Specify the settings.
Setting
System
SettingsStrataSync
Account ID
StrataSync Tech ID/
User ID
Interface
Server Address
Server Port
6 Touch the Start button.
System Menu on page
System Menu on page
Description
Enter the account identification number. Only
change this if necessary.
Enter the technician/user identification number.
Ethernet- indicates ??
DOCSIS- When set, firmware update will not
occur. There is no on-screen reminder of this
fact.
To sync via RF Port 1 please use the
"Connection" app in the CATV section at the top
of the Home screen to establish a live
connection with the CMTS prior to syncing to
StataSync.
Enter the DNS address for the server.
The default address is:
"https://stratasync.viavisolutions.com"
Enter the server port number.
The default port is: 443
OneExpert CATV User's Guide
22121055-001, Rev000
Chapter 2 Utilities
Synchronizing to the StrataSync server
17), select
17), touch the
Page 47