The currently loaded Work Order is the default.
2
Select any listed Work Order from the list of loaded work orders.
3
Select Enter.
To Run a test at location and create a new Work Order
1
On Setup screen for the test you are running, select the Work Order ID
button.
2
Add new Work Order.
3
Enter the name of the new Work Order (up to 50 characters)
4
Select Enter.
To Run a test without entering any Work Order in a new
location
1
On Setup screen for the test you are running, select the Work Order ID
button.
The following screen will usually appear.
OneExpert CATV User's Guide
22121055-001, Rev000
Chapter 3 Menus and Workflow
Testing Workflow
Page 61