4
Go to the System Settings menu (see
menu on page
–
Network Software Update. Select this if you are updating the
firmware using a network (Ethernet or WiFi) connection.
–
USB Update. Select this if you are updating the firmware using a
USB drive.
5
Do the following:
Source of update
USB drive
17), then select one of the following:
Do this
NOTE: Be certain no Ethernet cables are
plugged in when performing USB Upgrade.
– Connect the drive with the firmware to the
USB connector on the right panel. The
OneExpert will auto-detect the USB drive.
– Touch USB Software Update and then
select the desired firmware file on the USB
drive.
– Press the Update button and the upgrade
will begin.
– Press Update again to confirm.
– The meter will power off when the upgrade
is complete.
OneExpert CATV User's Guide
22121055-001, Rev000
Updating the instrument's firmware
Displaying the System Settings
Chapter 2 Utilities
Page 39