Viavi OneExpert CATV User Manual page 134

exceed limits

Warning = Pass but No Fail –the measurement is highlighted to
bring attention to the result that has exceeded the limit

None = Test result is shown but no Pass or Fail criteria is applied to
the result
Viewing, Editing, Renaming or Deleting an Existing Limit Plan
From the Global Archive: Limit Plan screen:
1 Check the box in front of the desired Limit Plan.
2. Select the Action button above the left side of the list pane.
The Actions dropdown appears.
Chapter 8 Configuring the OneExpert with StrataSync
OneExpert CATV User's Guide
22121055-001, Rev000
Limit Plans
Page 111