Viavi OneExpert CATV User Manual page 116

Adjust the focus or centering using the controls on the P5000i.
4. To select the inspection profile, touch Profiles.
If you have a custom profile, you can use it on the OneExpert CATV
by putting the file into the configs/Microscope folder. For more
information on copying or transferring files using the file manager,
refer to
5. Touch Options and then select any of the following:
Setting
About Scope
Run Analysis
Auto-center
live
Show Focus
Meter
Tip
Managing files on page
Description
Provides view details about the microscope, such as
model number, firmware version and serial number.
Specify whether to perform an analysis on the fiber or
simply take a snapshot without an analysis (Freeze).
When checked, the live picture automatically centers
on the fiber center. If not checked, the picture will
center at the last location of a fiber center following an
analysis. High magnification is always automatically
centered.
Specify whether to show the focus meter (the blue and
white bar that appears on the right side of the screen).
Specify which tip is being used on the microscope:
Standard Tips (with BAP1) or Simplex Long Reach (-L)
Tips.
OneExpert CATV User's Guide
22121055-001, Rev000
51.
Chapter 6 Optical Tools
Inspecting fiber
Page 93