Viavi OneExpert CATV User Manual page 140

measurement at that location.
The Type of limit is also selectable –

Error = Pass if results meet the limit requirements or Fail if results
exceed limits

Warning = Pass but No Fail –the measurement is highlighted to
bring attention to the result that has exceeded the limit

None = Test result is shown but no Pass or Fail criteria is applied to
the result
DOCSIS Service Plan VOIPCheck Limits (future)
All of the VOIPCheck limits and their type definition can be defined by
entering values into their boxes. The data limits and their desired type that
can be assigned for each of the MAC addresses includes:
• Average Packet Loss
• Maximum Packet Loss
• Average Jitter
• Maximum Jitter
• Average Delay
• Maximum Delay
Saving DOCSIS Service Plan
When all values have been entered, press Save.
Chapter 8 Configuring the OneExpert with StrataSync
OneExpert CATV User's Guide
22121055-001, Rev000
DOCSIS Service Plans
Page 117