Viavi OneExpert CATV User Manual page 58

Your instrument immediately scans for WiFi networks, and lists each
network as an item.
– A lock indicates that authentication is required to connect to a
network.
– Saved, In Range indicates that a profile for the network has been
saved on your instrument, and a connection can be established to the
instrument.
– Saved, Out of Range indicates that a profile for the network has been
saved on your instrument, but the network is out of range (and
therefore, a connection cannot be established).
– Incompatible indicates that a connection cannot be established to a
network.
– Connected indicates that the instrument has already established a
connection to the network.
The instrument automatically connects to the network determined to
provide the best available access point (based on signal strength and/or
encryption supported).
4 If you want to connect to a different network, touch the SSID of the WiFi
network. A screen appears with items that allow you to specify
advanced settings (profile settings), forget a saved network, or connect
to the network.
5 Touch Connect.
– Messages appear briefly on the indicating that the instrument is
performing a four-way handshake, then authenticating to the
network.
– The status of the connection (Network Up), and details concerning
the connection (IP address, netmask, gateway, and DNS server)
appear at the top right of the menu.
The instrument is connected to the WiFi network.
OneExpert CATV User's Guide
22121055-001, Rev000
Chapter 2 Utilities
Establishing network connections
Page 35