Configuring A Static Lsp - Alcatel-Lucent 7950 SR User Configuration Manual

Common Configuration Tasks

Configuring a Static LSP

An LSP can be explicitly (statically) configured. Static LSPs are configured on every node
along the path. The label's forwarding information includes the address of the next hop router.
Use the following CLI syntax to configure a static LSP:
CLI Syntax: config>router>mpls
The following displays a static LSP configuration example:
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-1>config>router>mpls#
Page 126
static-lsp lsp-name
to ip-address
push out-label nexthop ip-addr
no shutdown
static-lsp "static-LSP"
to 10.10.10.124
push 60 nexthop 10.10.42.3
no shutdown
exit
7950 SR OS MPLS Configuration Guide