Table of Contents
Advertisement
To shutdown only the primary enter the config router mpls lsp lsp-name primary path-name
shutdown command.
To shutdown a specific standby secondary enter the config router mpls lsp lsp-name secondary
path-name shutdown command. The existing configuration of the LSP is preserved.
Use the no form of this command to restart the LSP. LSPs are created in a shutdown state. Use this
command to administratively bring up the LSP.
Default
shutdown
lsp-template
Syntax
[no] lsp-template lsp-template-name p2mp-lsp
Context
config>router>mpls
Description
This command creates a template construct that can be referenced by client application where
dynamic LSP creation is required. 'p2mp-lsp' keyword is mandatory.
The no form of command deletes LSP template. LSP template cannot be deleted if a client
application is using it.
Default
none
Parameters
default-path
Syntax
[no] default-path path-name
Context
config>router>mpls>lsp-template
Description
A default path binding must be provided before LSP template can be used for signaling LSP. LSP
template must be shutdown to modify default-path binding.
The no form of command should delete path binding.
Default
none
Parameters
path-name
7950 SR OS MPLS Configuration Guide
lsp-template-name — Name to identify LSP template. Any LSP template name and LSP name
must not be same.
MPLS and RSVP
Page 289
Advertisement
Chapters
Table of Contents
