Alcatel-Lucent 7950 SR User Configuration Manual page 411

Parameters
interface-name — Specifies the name, up to 32 characters in length, of the network IP interface. An
tunneling
Syntax [no] tunneling
Context
config>router>ldp>targ-session>peer
Description
This command enables LDP over tunnels.
The no form of the command disables tunneling.
Default
no tunneling
7950 SR OS MPLS Configuration Guide
interface name cannot be in the form of an IP address. If the string contains special characters (#,
$, spaces, etc.), the entire string must be enclosed within double quotes.
LDP Configuration Commands
Page 411