Table of Contents
Advertisement
4659
4660
-------------------------------------------------------------------------------
No. of Groups: 30
===============================================================================
*A:SRU4>config>router>mpls#
*A:SRU4>config>router>mpls# show router mpls srlg-group "1432"
===============================================================================
MPLS Srlg Groups
===============================================================================
Group Name
-------------------------------------------------------------------------------
1432
-------------------------------------------------------------------------------
No. of Groups: 1
===============================================================================
*A:SRU4>config>router>mpls#
static-lsp
Syntax
static-lsp [lsp-name]
static-lsp {transit | terminate}
static-lsp count
Context
show>router>mpls
Description
This command displays MPLS static LSP information.
Output
MPLS Static LSP Output — The following table describes MPLS static LSP output fields.
Lsp Name
To
Next Hop
In I/F
Out Label
Out I/F
Adm
Opr
LSPs
7950 SR OS MPLS Configuration Guide
Label
The name of the LSP used in the path.
The system IP address of the egress router for the LSP.
The system IP address of the next hop in the LSP path.
The ingress interface.
The egress interface.
The egress interface.
Down — The path is administratively disabled.
Up — The path is administratively enabled.
Down — The path is operationally down.
Up — The path is operationally up.
The total number of static LSPs.
4659
src-1.9
4660
src-1.10
Group Value
Interfaces
1432
srl-1
Description
MPLS and RSVP
Page 201
Advertisement
Chapters
Table of Contents
