Alcatel-Lucent 7950 SR User Configuration Manual page 271

The LSP maximum applies whether the bandwidth adjustment is triggered by normal adjust-timer
expiry, the overflow limit having been reached, or manual request or SDP auto-bandwidth
adjustment.
The SDP maximum applies to bandwidth adjustment caused by VLL CAC. The SDP maximum
bandwidth must be less than or equal to the sum of the max-bandwidth parameters of the LSPs in the
SDP.
This command is mandatory at the LSP level if an overflow-limit is configured.
The no form of the command means max-bandwidth is infinite (equivalent to 100 Gbps).
Default
no max-bandwidth
Parameters
mbps — Specifies the maximum bandwidth in mbps.
min-bandwidth
Syntax min-bandwidth mbps
no min-bandwidth
Context
config>router>mpls>lsp>auto-bandwidth
Description
This command configures the minimum bandwidth that auto-bandwidth allocation is allowed to
request for an LSP or SDP.
The LSP minimum applies whether the bandwidth adjustment is triggered by normal adjust-timer
expiry or, manual request or SDP auto-bandwidth adjustment.
The no form of the command means min-bandwidth is zero.
Default
no min-bandwidth
Parameters
mbps — Specifies the minimum bandwidth in mbps.
monitor-bandwidth
Syntax [no] monitor-bandwidth
Context
config>router>mpls>lsp>auto-bandwidth
Description
This command enables the collection and display of auto-bandwidth measurements, but prevents any
automatic bandwidth adjustments from taking place, other than those caused by VLL CAC (through
an SDP bandwidth change).
This command is mutually exclusive with the overflow-limit command.
The no form of the command the collection and display of auto-bandwidth measurements.
7950 SR OS MPLS Configuration Guide
Values
0 — 100000
Default
0
Values
0 — 100000
Default
0
MPLS and RSVP
Page 271