Table of Contents
Advertisement
Parameters
number — The number of overflow samples that triggers an overflow auto-bandwidth adjustment
percent — The minimum difference between the current bandwidth of the LSP and the sampled data
mbps — The minimum difference between the current bandwidth of the LSP and the sampled data
bgp-transport-tunnel
Syntax
bgp-transport-tunnel include | exclude
Context
config>router>mpls>lsp
Description
This command allows or blocks RSVP-TE LSP to be used as a transport LSP for BGP tunnel routes.
Default
bgp-transport-tunnel include
Parameters
include — Allows RSVP-TE LSP to be used as transport LSP from the ASBR to local PE router, from
exclude — Blocks RSVP-TE LSP to be used as transport LSP from the ASBR to local PE router, from
class-type
Syntax
class-type ct-number
no class-type
Context
config>router>mpls>lsp
config>router>mpls>lsp>primary
config>router>mpls>lsp>secondary
Description
This command configures the Diff-Serv Class Type (CT) for an LSP, the LSP primary path, or the
LSP secondary path. The path level configuration overrides the LSP level configuration. However,
only one CT per LSP path will be allowed as per RFC 4124.
7950 SR OS MPLS Configuration Guide
attempt.
Values
1 — 10
Default
none
rate, expressed as a percentage of the current bandwidth, for counting an overflow sample.
Values
1 — 100
Default
none
rate, expressed as an absolute bandwidth (Mbps) relative to the current bandwidth, for counting
an overflow sample.
Values
1— 100000
Default
0
ingress PE to ASBR in the local AS or between multi-hop eBGP peers with ASBR to ASBR
adjacency.
ingress PE to ASBR in the local AS or between multi-hop eBGP peers with ASBR to ASBR
adjacency.
MPLS and RSVP
Page 273
Advertisement
Chapters
Table of Contents
