Alcatel-Lucent 7950 SR User Configuration Manual page 377

Common Configuration Tasks
This section provides information to configure:
•
•
•
•
•
•
•
•
Enabling LDP
LDP must be enabled in order for the protocol to be active. MPLS must also be enabled. MPLS is
enabled in the
Use the following syntax to enable LDP on a router:
CLI Syntax: ldp
Example:
The following displays the enabled LDP configuration.
A:ALA-1>config>router# info
----------------------------------------------
...
#------------------------------------------
echo "LDP Configuration"
#------------------------------------------
----------------------------------------------
...
A:ALA-1>config>router#
7950 SR OS MPLS Configuration Guide
Enabling LDP on page 377
Configuring FEC Originate Parameters on page 378
Configuring Graceful-Restart Helper Parameters on page 379
Applying Export and Import Policies on page 380
Targeted Session Parameters on page 381
Interface Parameters on page 382
Peer Parameters on page 383
Interface Parameters on page 382
config>router>mpls
config>router# ldp
ldp
interface-parameters
exit
targeted-session
exit
exit
context.
Label Distribution Protocol
Page 377