Table of Contents
Advertisement
Show Commands
to_110_20_1_1_cspf_6
to_110_20_1_1_cspf_7
to_110_20_1_1_cspf_8
to_110_20_1_1_cspf_9
to_110_20_1_1_cspf_10
to_110_20_1_1_cspf_11
to_110_20_1_1_cspf_12
to_110_20_1_1_cspf_13
to_110_20_1_1_cspf_14
to_110_20_1_1_cspf_15
...
-------------------------------------------------------------------------------
LSPs : 201
===============================================================================
*A:SRU4>config>router>mpls#
Autobandwidth
Auto BW Min
Auto BW Max
AB Up Thresh
AB Down Thresh
AB Adj Time
AB Sample Time
AB Last Adj
AB Next Adj
AB Max AvgR*
AB Lst AvgR*
AB Oflow Lmt
Page 170
Label
Enabled – Auto-bandwidth adjustment is enabled on this LSP. Dis-
abled – Auto-bandwidth adjustment is disabled on this LSP.
The minimum bandwidth of the LSP that auto-bandwidth can request
The maximum bandwidth of the LSP that auto-bandwidth can
request
The percent threshold for increasing LSP bandwidth followed by
absolute threshold in ().
The percent threshold for decreasing LSP bandwidth followed by
absolute threshold in ().
The configured adjust-count times the collection-interval.
The configured sample-count times the collection-interval.
The system time of the last auto-bandwidth adjustment and the
cause: (M) manual (T) normal expiry of adjust-timer (O) overflow
(C) VLL CAC
The system time when the adjust-timer will expire next [or the
remaining adjust-count, if this is not possible].
The maximum average data rate in any sample interval of the current
adjust interval
The average data rate measured in the sample interval that ended
most recently
The configured value of the auto-bandwidth overflow-limit
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
110.20.1.1
No
Description
7950 SR OS MPLS Configuration Guide
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Up
Advertisement
Chapters
Table of Contents
