Settings Related To Sheet Counters; Checking The Sheet Counters - Fujitsu SP-1120N Operator's Manual

Settings Related to Sheet Counters

Checking the Sheet Counters

The status of each consumable part can be viewed to determine when to replace the consumables.
The background color of the counter changes as it gets closer to the time to replace the consumables.
The background color of the roller set counter turns light yellow when the number of sheets scanned reaches
95,000, and turns yellow when it reaches 100,000.
For details about replacement cycles, refer to
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting].
In this window, you can check the following items:
Total Count (ADF)
Total number of sheets scanned using the ADF
Roller Set
Displays the number of sheets scanned after the roller set is replaced.
The number increases in increments of 500 sheets.
Consumables and Replacement Cycles (page
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
120).
135
77).