Settings Related To Sheet Counters; Checking And Resetting The Counters - Fujitsu fi-6800 Operator's Manual

Chapter 8 Operational Settings

8.3 Settings Related to Sheet Counters

Checking and Resetting the Counters

■
Checking and Resetting the Counters
[Sheet count]
You can check the replacement cycle of the consumables and
the total page count of the maintenance parts.
The background color of the counter changes when either
consumable replacement, maintenance part replacement, or
cleaning is required. The counter changes the background
color in the following cases:
Background color changes to light yellow when the page count after

replacing the consumable reaches 95% of the value configured in
"Specifying the Cycle to Replace Consumables [Life Counter Alarm
Setting]" (page 148) in the Software Operation Panel, and changes to
yellow when it reaches 100%. (For brake roller/pick roller/separator
roller counters)
Background color changes to yellow when the scanner determines

that the condition of the roller has exceeded the threshold that can be
corrected by monitoring the wear on the roller. (For assist roller
counter)
Background color changes to yellow when the page count after

cleaning reaches 100% of the value configured in
Cycle to Clean the Scanner [Cleaning Cycle]" (page 147)
Software Operation Panel. (Cleaning counter)
Background color changes to yellow when the amount of remaining

ink reaches below 33%. This is displayed only when the imprinter is
installed. (For [Ink Level: Front] / [Ink Level: Back])
1
Start up the Software Operation Panel.
Refer to
2
From the listing on the left, select [Device Setting].
"Specifying the
in the
In this dialog box, you can check the following items:
Total Page Count (ADF)
After cleaning
"8.1 Starting Up the Software Operation Panel" (page
Item Description
Approximate number of sheets
scanned through the ADF (in units of
10)
Approximate number of sheets
scanned after the last cleaning (in
units of 50)
TOP
Contents
Index
Introduction
Scanner
132).
Overview
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
145