EVO S - Installation and Servicing
Without control of the secondary communications
A. HYDRAULIC DIAGRAM
The existing regulation system controls the installation's heating circuit.
It sends the outlet temperature set point to the boiler, either over the LPB bus through the OCI 345 interface
(SIEMENS protocol), or by a 0 - 10 V signal, sent directly to the NAVISTEM B3000.
When controlled by the external regulator, the boiler operates according to a sliding temperature scale
when it starts for the heating, according to the outdoor temperature.
B. REGULATION ACCESSORY REQUIRED
Communication kit for LPB bus
(for dialogue over LPB bus)
44 / 136
Single boiler
networks 0...10V or LPB
figure 22 - VF1 diagram
Quantity Appliance reference
1
OCI 345
Diagram
VF1
page 1 / 4
Order No.
219285
00RNO0333-B (U0625869)