IDEAL EVO S 50 Installation And Servicing page 86

EVO S - Installation and Servicing
E. D. SPECIFIC START-UP PROCEDURE
" "
Make the accessories' electrical connections.
" "
Start up the boiler only.
" "
Make the following settings:
• Time and date menu
Set the time
Set the date
Set the year
• Configuration menu
Configure the alarm output
Configure DHW pump Q3
• Configuration menu
Save the sensors
• Domestic hot water menu
Adjust the comfort setting
Adjust the DHW release mode
• Activate the DHW mode
F. ELECTRICAL AND HYDRAULIC VALIDATION
• Inputs/outputs test menu
Check the outputs
Alarm relay
DHW pump Q3
Reset the outputs
86 / 136
Diagram: VF24
Line No.
Hours / minutes (1)
Day / month (2)
Year (3)
Relay output QX1 (5890)
Relay output QX2 (5891)
Save sensors (6200)
Nominal setpoint (1610)
Release (1620)
Relay test (7700)
Relay test (7700)
Relay test (7700)
00RNO0333-B (U0625869)
page 3 / 4
Value
HH.MM
DD.MM
YYYY
Alarm output K10
DHW ctrl elem Q3
Yes (switches back
to no automatically)
55 °C
24/day
Relay output QX1
Relay output QX2
No test