IDEAL EVO S 50 Installation And Servicing page 87

Check the sensor values
B3 DHW sensor
• Configuration menu
Check the hydraulic diagram
G. CONFIGURATION OPTIMISATION
DHW optimisation:
• DHW tank menu
Adjust the over value
Maintenance optimisation
A maintenance message may be generated that does not set the boiler to fault. This maintenance
message may be displayed after the following 3 counters have expired:
• Time since last maintenance (or commissioning): set parameter 7044 to 12 months.
• Operating hours of the burner (parameter 7040).
• Number of starts (parameter 7042)
These last 2 parameters are dependent on the boiler's hydraulic installation. We recommend
using at least parameter 7044 for annual maintenance.
27.08.2018
Diagram: VF24
Check no. heat source 1 (6212)
Check no. heat source 2 (6213)
Check no. storage tank (6215)
Check no. heating circuits (6217)
EVO S - Installation and Servicing
Line No.
DHW temp B3/B38 (7750)
Flow setpoint boost (5020)
page 4 / 4
Value
in °C
13
0
4
0
16 °C
87 / 136