Page 1
When replacing any part of this appliance, use only spare parts that you can be assured conform to safety and performance specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers...
Commissioning Checklist. You can check your installer by calling CORGI direct on 01256 372300. Ideal Stelrad Group is a member of the Benchmark initiative and fully supports the aims of the programme. Benchmark has been introduced to improve the standards of instal- lation and commissioning of central heating systems in the UK and to encourage the regular servicing of all central heating systems to ensure safety and efficiency.
FROST PROTECTION turning the knob C. Approx CH flow temperatures for the boiler thermostat Mini C24, Mini C28 and Mini C32 appliances are provided settings: with a built in anti ---freeze system that operates the boiler when the temperature is below 5 ˚C Minimum (38 ˚C)
F Check the cylinder thermostat is set at the required temperature --- Test the cylinder thermostat by turning fully up --- If this does not respond contact your installer Ideal Stelrad Group pursues a policy of continuing improvement in the design and per- Ideal Consumer Helpline: formance of its products.