Aviat A-1C Christen Husky 80" wingspan size 15-20cc
INSTALLING THE FLAP PUSHROD
Repeat the procedure for the aileron
pushrod.
1.
2.
M3 clevis
3.
INSTALLING THE FUSELAGE SERVOS
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Install the rubber grommets and brass
collets into all servos. Test it the servos
into the fuselage servo mounts.
10
40mm
M3 lock nut
80mm
1.
hrottle servo
Secure the servos with the screws pro-
vided with your radio system.
2.
Rudder servo
THROTTLE SERVO ARM
Install adjustable servo connector in the
servo arm as same as picture below:
.
1.
Instruction Manual.
Rudder servo
Tail wheel
Elevator servo
hrottle servo
Elevator servo
INSTALLATION