Installing The Spinner - Seagull Models Grumman F8F Bearcat Assembly Manual

9.
10.
4x20mm
11.
Epoxy.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
160mm
Balsa stick.
12.
13.
14.

INSTALLING THE SPINNER

Install the spinner backplate, propeller
and spinner cone.
1.
Speed cotrol.
Tie-wraps.
Battery.
21