Installing The Spinner - Seagull Models SEA385 Assembly Manual

Giant Scale Cessna O-1 Bird Dog 122" ARF 70-125cc
3.
4.
Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
5.
40
2mm
6 .
M4x25mm
7 .
Because of the size of the cowl, it may be nec-
essary to use a needle valve extension for the
high speed needle valve. Make this out of suf-
icient length 1.5mm wire and install it into
the end of the needle valve. Secure the wire in
place by tightening the set screw in the side of
the needle valve.

INSTALLING THE SPINNER

Install the spinner backplate, propeller
and spinner cone.
1.
Instruction Manual.
M4x25mm