Ieee Standards - Dell EMC Z9264F-ON Installation Manual

Hide thumbs Also See for Z9264F-ON:
Table of Contents

Advertisement

Table 6. Environmental parameters
Parameter
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Maximum thermal output
Maximum operational altitude
Maximum non-operational altitude
Shock
Table 7. AC power requirements
Parameter
Power supply
Maximum current draw per switch
Maximum power capability
Typical power consumption
Table 8. DC power requirements
Parameter
Minimum/maximum input voltage range
Input power at full load
Input current at full load

IEEE standards

The Z9264F-ON switch complies with the following IEEE standards.
802.1ab (LLDP)
802.1ax (Layer 2)
802.1d, 802.1w, 802.1s, 802.1x (Mgmt/Security), 802.3x (Layer 2)
802.3 (1000BASE-KX)
802.3ba (40GbE and 100GbE ports)
Specifications
0°C to 45°C (32°F to 113°F)
-5°C to 45°C (23°F to 113°F) short term
Short term is </= 1% of operational hours per year.
NOTE:
Reduce maximum temperature by 1°C/125 meters
(1°F/228 feet) above 950 meters (3,117 feet).
5% to 90% (RH), non-condensing
–40°C to 70°C (–40°F to 158°F)
5% to 90%, non-condensing
470 W = 1603.7 BTU/Hr
5,000 feet (1,524 meters)
39,370 feet (12,000 meters)
Dell EMC Spec SV0115
Specifications
100–240 VAC 50/60 Hz
4.7A/3.9A at 100/120V AC 2.35A/1.95A at 200/240V AC
1104.37W (based on 4.5W QSFP28)
900W
Specifications
-48V, –60V
−48V/930W, −60V/950W (without fan)
−48V/940W −60V/ 960W, with fan
−48V/19.0A −60V/ 15.6A, without fan
−48V/19.2A −60V/ 16.0A, with fan
Specifications
39

Advertisement

Table of Contents
loading

Table of Contents