After Switch Placement - Dell EMC Z9264F-ON Installation Manual

For more information, see Unpack.
6 Confirm that the software version of the replacement switch is the same as the previously installed switch.
show os-version
If the software versions do not match, upgrade the replacement switch software using the procedure included with the firmware
download.
7 Copy the backed-up switch configuration to the new switch.
copy tftp://hostip/filepath running-config
8 Install the new switch in your rack or cabinet.
For detailed installation instructions, see
If you are using the fan trays or PSUs from the removed switch, reinsert them in the replacement switch.
9 Connect all the cables.
10 Power on the switch.
For more information, see

After switch placement

After you have securely installed and powered on the Z9264F-ON switch:
• If you are using Dell EMC software, see switch documentation at www.dell.com/support.
• If you need ONIE information, see ONIE documentation at www.onie.org.
• If you are using third-party software, see your third-party documentation.
Z9264F-ON switch
Switch power-up.
installation.
Z9264F-ON switch installation 27