P6100, P8100 & P4100 Controllers - Operator Mode - WEST P8700 User Manual

1/4, 1/8 and 1/16 din plus series controllers & indicators
Table of Contents

Advertisement

1
1
1
/
-DIN,
/
-DIN &
/
4
8
16
Parameter
Setpoint Value
Local Setpoint Value
Setpoint 1 Value
Setpoint2 Value
Set-up Lock Code
**First Operator mode displays follows.
Note:
Alarm parameters marked * are repeated in Configuration Mode.
Note:
**Once the complete list of Set Up Mode parameters has been displayed, the first
Operator Mode display is shown without exiting from Set Up Mode. Display seen is
dependant on the Display Strategy and status of Auto/Manual mode selection.
P6100, P8100 & P4100 Controllers - Operator Mode
This is the mode used during normal operation of the instrument. It can be accessed from
Select Mode, and is the usual mode entered at power-up. The available displays are
dependent upon whether Dual or Remote Setpoint modes are being used, whether Setpoint
Ramping is enabled and the setting of the Display Strategy parameter in Configuration Mode.
WARNING:
IN NORMAL OPERATION, THE OPERATOR MUST NOT REMOVE THE CONTROLLER FROM
ITS HOUSING OR HAVE UNRESTRICTED ACCESS TO THE REAR TERMINALS, AS THIS
WOULD PROVIDE POTENTIAL CONTACT WITH HAZARDOUS LIVE PARTS.
CAUTION:
Set all Configuration Mode parameters and Set Up Mode parameters as required
before starting normal operations.
59305, Issue 5 – March 2005
- DIN Controllers & Indicators - Product Manual
Lower
Display
Adjustment Range
Within scale range upper
:-'
and lower limits
+:-'
Within scale range upper
and lower limits.
B+:-
B or * before the legend
or
indicates if this is the
*+:-
currently active SP
:-2'
Within scale range upper
and lower limits.
B:-2
B or * before the legend
or
indicates if this is the
*:-2
currently active SP
:-3'
Within scale range upper
and lower limits.
B:-3
B or * before the legend
or
indicates if this is the
*:-3
currently active SP
0 to 9999
:+"?'
Upper Display
P6100, P8100 & P4100 Model Group
Default
When
Value
Visible
Range
Always
minimum
,1%5  or
Range
minimum.
,1%6 = 9:-<
Range
D<!< or
minimum.
D<!3 = D<:2
Range
D<!< or
minimum.
D<!3 = D<:2
2@'
Always
Page 47

Advertisement

Table of Contents
loading

Table of Contents