Table of Contents
Advertisement
15 Appendix 1 – Glossary
This Glossary explains the technical terms and parameters used in this manual. The entry
type is also shown:
General Definition:
Controller Definition:
Limit Controller Definition:
Indicator Definition:
General Parameter:
Controller Parameter:
Controller Tuning Parameter: Parameters relating to the tuning of controller models
Indicator Parameter:
Active Setpoint
Active Setpoint is the setpoint used as the current target SP value. Some controllers can
have more than one setpoint, but only one of these is active at any time.
Also refer to Remote Setpoint, Setpoint, Setpoint Select and Setpoint Select Enable.
Actual Setpoint
Actual Setpoint is the current value of the setpoint. This may be different to the Active
Setpoint's target value if the setpoint is currently ramping. The actual setpoint will rise/fall at
the ramp rate set, until it reaches the target setpoint value.
Also refer to Active Setpoint, Setpoint, Setpoint Ramp Enable and Setpoint Select.
Page 106
1
1
1
/
-DIN,
/
-DIN &
/
4
8
16
Terms applicable to the entire model range.
Terms applicable to controller models only.
Terms applicable to limit controller models only.
Terms applicable to indicator models only.
Parameters applicable to the entire model range.
Parameters applicable to controller models only.
Parameters applicable to indicator models only.
Glossary
- DIN Controllers & Indicators - Product Manual
59305, Issue 5 – March 2005
Type: Controller Definition
Type: Controller Definition
Advertisement
Table of Contents
