Lock Code View; Entry And Navigating In Lock Code View Mode; -Din, 1 / 8 -Din & 1 / 16 - Din Controllers & Indicators - Product Manual; Table 10. Lock Code View Menu - WEST P8700 User Manual

1 1 1
/ -DIN, / -DIN & /
4 8 16

Lock Code View

In the event that a lock code is forgotten, the instrument lock code values can be seen in the
lock code view. In this view the codes are read only, the codes can be changed from the
mode to which they apply.

Entry and Navigating in Lock Code View Mode

Press and
display is shown.
Once in this mode
Press to step between lock codes.
Note:
If there is no key activity for 2 minutes the instrument returns to Operator Mode. To
forcefully exit this view, switch off the instrument.
Lock Code Description
Name
Configuration Read only view of
Lock Code Configuration Lock Code.
Setup Lock Read only view of Setup
Code Mode Lock Code.
Automatic Read only view of
Tune Lock Automatic Tune Lock
Code Code.
*Note:
On Indicators (which have a single line display), this legend is shown for approx 1 second
before the Main display value.
59305, Issue 5 – March 2005
- DIN Controllers & Indicators - Product Manual
together whilst the instrument is powering up until the $+"?

Table 10. Lock Code View Menu

Upper/Main Lower Display
Display (or 1
Current Value
Current Value
Current Value
Operating and Information Modes
1
/
st
Legend)* Indicator Units
Display
$+"?'
:+"?'
K+"?'
DIN
8
$'
:'
Page 35