Table of Contents
Advertisement
1
1
1
/
-DIN,
/
-DIN &
/
4
8
16
How to use this manual
This manual is structured to give easy access to the information required for all aspects of
the installation and use and of the products:
Section 1:
Introduction - A brief description of the product range.
Section 2:
Installation - Unpacking, installing and panel mounting instructions.
Section 3:
Plug-in Options - Installation of the plug-in option modules.
Section 4:
Wiring Guidelines - Guidance on good wiring practice, noise avoidance, wiring
diagrams and input/output connections.
Section 5:
Powering Up - Powering up procedure and brief description of the displays
and switches.
Section 6:
Messages & Error Indications - Display Messages and fault indications.
Section 7:
Operation Modes - Descriptions of the operation modes common across the
range. These include Select Mode for gaining access to the Setup and Configuration menus,
Automatic tuning on controllers and the Product information menu.
Section 8:
P6100, P8100 & P4100 Model Group - Describes the menus and features
unique to the process controllers in this model group. These include Configuration Mode,
Setup Mode & Operator Mode menus, and the serial communications parameters. Also
detailed is Setpoint adjustment, use of Manual Control Mode and automatic PID tuning.
Section 9:
P6700, P8700 & P4700 Model Group - Describes the menus and features
unique to the limit controllers in this model group. These include Configuration Mode, Setup
Mode & Operator Mode menus, and the serial communications parameters. Also detailed is
adjustment of the Limit Setpoint and resetting the Limit Output.
Section 10: P6010 & P8010 Model Group - Describes the menus and features unique to
the indicators in this model group. These include Configuration Mode, Setup Mode &
Operator Mode menus, and the serial communications parameters. Also detailed the Tare
and Multi-Point Scaling Functions.
Section 11: Manually Tuning Controllers - Advice on manually adjusting the PID
controller tuning parameters.
Section 12: Modbus Serial Communications - Details the physical layer and message
formats used for the Modbus communications protocol common to all products in the range.
Section 13: ASCII Serial Communications - Details the physical layer and message
formats used for the ASCII serial communications protocol available on some products.
Section 14: Calibration Mode - Step-by-step instructions to calibrate the instrument. This
section is intended for use by suitably qualified personnel.
Appendix 1: Glossary - Explanations of the terms used and product features.
Appendix 2: Specification - Technical specifications for all products in the range.
Appendix 3: Product Coding - Product model/ordering codes.
59305, Issue 5 – March 2005
- DIN Controllers & Indicators - Product Manual
Page 1
Advertisement
Table of Contents
