ABB ACQ550-x1-06A6-2 User Manual page 32

32
Reinstall the cover
IP21 / UL type 1
1. Align the cover and slide it on.
2. Tighten the captive screw.
3. Reinstall the control panel.
4. Continue with start-up. See chapter
control with I/O and ID Run
IP54 / UL type 12
1. Align the cover and slide it on.
2. Tighten the captive screws around
the edge of the cover.
3. Slide the hood down over the top
of the cover. (Only needed for UL
type 12 installations.)
4. Install the two screws that attach
the hood. (Only needed for UL
type 12 installations.)
5. Install the control panel.
Note: The control panel window
must be closed to comply with
IP54 / UL type 12.
6. Optional: Add a lock (not supplied) to secure the control panel window.
7. Continue with start-up. See chapter
33.
Installation
2
Start-up,
on page 33.
R6
4
4
5
6
Start-up, control with I/O and ID Run
ACQ550-U1 User's Manual
1
3
R1...R5
3
1
2
IP2009
FM
on page