Control Panel To Module Wiring Overview - Bosch B9512G Installation Manual

10 en | Control panel installation
Control panel voltage at Terminals 9 and 10) Terminal potentially causing ground fault
~ 0 VDC
~ 13.65 VDC
~ 2.51 VDC
~ 2.44 to 3.2 VDC
~ 10.9 to 11.2 VDC
~ 7.2 VDC
~ 5.8VDC
~ 7.35 VDC
3.3

Control panel to module wiring overview

You can use interconnect or terminal wiring to connect devices to the control panel.
If SDIx is configured for SDI2, use either SDI2 bus.
Using terminal wiring in parallel
Notice!
Wire size
For terminal wiring, use 18 AWG to 22 AWG (1.0 mm to 0.6 mm) wire.
2019-12 | 06 | F.01U.304.001
4, 9, 12, 15, 17, 21
5, 6, 7, 8, 26, 30
11, 13, 14, 16, 17, 19, 20, 22
24
25
28
29
1, 2
UL Installation manual
Control panels
Bosch Security Systems B.V.