Module And Host Computer Network Detection - Wiznet W7500S2E-R1 User Manual

W7500S2E-R1 serial to Ethernet module
Figure 4-2 WIZS2E ConfigTool search result

4.3 Module and host computer network detection

Before starting to communicate between the WIZS2E module and the host computer, please
ensure the host computer and the module are in the same network segment.
The factory default setting for IP address and Subnet mask in WIZS2E module are 192.168.1.88
and 255.255.255.0 respectively. User could follow the flow diagram 4-3 to understand the
communication procedure between the module and the host computer. If they are in the same
network segment, it could communicate with the module. Otherwise, the host computer needs to
change its IP address to communicate with the module.
W7500S2E-R1 IP Address W7500S2E-R1 Submask PC Submask PC IP Address
？ ？
192.168.1.88 255.255.255.0
and and
W7500S2E-R1 Subnet PC Subnet
？
192.168.1.0 Compare
The Same Subnet Different Subnet
Use W7500S2E-R1 to Communicate Change IP Address
Figure 4-3 WIZS2E module and IP segment of host computer flow diagram
W7500S2E-R1 user manual
11