Advance Settings - Wiznet W7500S2E-R1 User Manual

Parity: The parity bit option, default: 8, it could set into NONE, ODD or EVEN
Stop Bit: The stop bit option, default: 1, it could set into 0.5, 1, 1.5 or 2 bits
Flow Control: Shows the flow control option, default is NONE, it could set into NONE or
"CTS/RTS mode"
#
User configurable
Save Settings: The button to save all these settings, it shows a prompt window with "Success
saved!" message.
Reset: Reset button, if the user doesn't need to configure on advanced settings, please press the
OK button for reset the module; after reset, the saved settings will be activated.

7.3 Advance Settings

Figure 7-7 shows the advance settings page of WIZS2E module.
W7500S2E-R1 user manual
#
Figure 7‑5 Web page prompt - Save Success
Figure 7‑6 Web page prompt - reset
W7500S2E-R1 serial to Ethernet module
38
#
#