Local Network Setting - Wiznet WIZ630wi User Manual

4.2 Local network setting

4.2 Local network setting
4.2 4.2 Local network setting Local network setting
WIZ630wi internal IP setting, DHCP server setting and DHCP.
Type Type
Type Type
IP Address IP Address IP Address IP Address
Subnet Mask Subnet Mask Subnet Mask Subnet Mask
MAC Address MAC Address MAC Address MAC Address
DHCP Server DHCP Server DHCP Server DHCP Server
Start IP Address Start IP Address Start IP Address Start IP Address
End IP Address End IP Address End IP Address End IP Address
Subnet Mask Subnet Mask
Subnet Mask Subnet Mask
Primary DNS Server Primary DNS Server
Primary DNS Server Primary DNS Server
Secondary DNS Server Secondary DNS Server
Secondary DNS Server Secondary DNS Server
Lease Time Lease Time
Lease Time Lease Time
St St St Statically Assigned atically Assigned
atically Assigned atically Assigned
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
Enter the module's IP. (Default Value : 192.168.16.254)
Enter the module's subnet mask.
MAC Address of module's LAN port (Wireless included). (Read Only)
Decide whether the module's DHCP server will be used.
Set the start IP address that will be assigned from the DHCP server
Set the end IP address that will be assigned from the DHCP server.
Enter the value of subnet mask.
Enter the primary DNS server address.
Enter the secondary DNS server.
Enter the lease time when IP address is assigned.
Maximum of three IP can be statically assigned when IP address is
assigned.
Description Description
Description Description
19