6.4.2.9 Ethernet receive counter (AT+NETRCV)
Command format
AT+NETRCV?\r\n
return value
Value ranged is 0 to 4,294,967,295.
6.4.2.10 Device uptime (AT+RUNTIME)
Command format
AT+RUNTIME?\r\n
Return value
Received the device uptime of the WIZS2E module; Unit: seconds
Return format: ddd-hh-mm-ss
6.4.2.11 Firmware version (AT+VER)
Command format
AT+VER?\r\n
Return value
6.4.3 Device configuration command list
6.4.3.1 Device ID (AT+SN)
Command format
AT+SN?\r\n
Return value
Device ID of the WIZS2E module for identification. It contains the last 6 HEX of the MAC address. This
attribute is read only.
6.4.3.2 Device type (AT+TYPE)
Command format
AT+TYPE?\r\n
Return value
Device type is clarifying the device is a serial to Ethernet module. This attribute is read only.
6.4.3.3 Device name (AT+NAME)
Command format
AT+NAME=<name>\r\n
AT+NAME?\r\n
Return value
Device name can be user defined for identification.
Remarks: When using NetBIOS name function, device name should follow the "AT+NETBIOS" naming
W7500S2E-R1 user manual
Description
Nil
Query the byte of data received from Ethernet interface
[NETRCV] Value is: <number>\r\nOK\r\n
Description
No
[RUNTIME] Value is: <time>000-00-18-26\r\nOK\r\n
Description
Nil
[VER] Value is: <firmware version>\r\nOK\r\n
Description
Nil
[SN] Value is: <device ID>\r\nOK\r\n
Description
Nil
[TYPE] Value is: W7500S2E-R1\r\nOK\r\n
Description
<name>
Device name: it can be any character; the maximum
length is 16 bit; user defined for identification
[NAME] Value is: <name>\r\nOK\r\n
23
W7500S2E-R1 serial to Ethernet module
Usage
Usage
Query current value
Usage
Query current value
Usage
Query current value
Usage
Query current value
Usage
Define new value
Query current value
rules.