Wiznet W7500S2E-R1 User Manual page 36

W7500S2E-R1 serial to Ethernet module
AT\r\n //Terminal check
OK\r\n
AT+ECHO=1\r\n //Echo ON
[ECHO] Value is: 1\r\n
AT+C1_OP=0 \r\n //Operating mode in TCP server
[C1_OP] Value is: 0\r\n
OK\r\n
AT+IP_MODE=0\r\n //Set into static IP mode
[IP_MODE] Value is: 0\r\n
OK\r\n
AT+IP=192.168.1.88\r\n //Set local IP address
[IP] Value is: 192.168.1.88\r\n
OK\r\n
AT+C1_PORT=5000\r\n //Set the local port number
[C1_PORT] Value is: 5000\r\n
OK\r\n
AT+EXIT\r\n //Save the settings and switch to data mode
W7500S2E-R1 user manual
32