Introduction Introduction WIZ630wi is a gateway module for converting the RS-232 protocol to TCP/IP protocol. WIZ630wi enables a device with RS-232 serial interface to connect to TCP/IP network through LAN and operate remote measuring, administration, and control. WIZ630wi has an embedded switch inside for IP-Router function, and can operate as 3G-Router/WiBro-Router through USB interface.
Some items may be not supported depending on the version. 2.1 Web address Web address Web address Web address Open a web browser on user’s PC. Input the default IP address of WIZ630wi, “192.168.16.254” and click Enter. 2.2 Web Login Web Login Web Login...
In this mode, all Ethernet ports and wireless interface are bridged together. Wired/Wireless interface has the same IP address space with its top mesh. DHCP Server function is disabled and WIZ630wi does not assign an IP. Wireless (LAN Port included) sending periodic Broadcast Packet to Station and maintains a connection with Station.
4.1 Internet connection setting Internet connection setting Internet connection setting Internet connection setting Select the internet service type and WIZ630wi can connect to the internet If users would like to access to Internet, Gateway Mode should be selected. Type Type...
4.2 Local network setting Local network setting Local network setting Local network setting WIZ630wi internal IP setting, DHCP server setting and DHCP. Type Type Description Description Type Type Description Description Enter the module’s IP. (Default Value : 192.168.16.254) IP Address...
5.6 Wireless Wireless network status network status Wireless Wireless network status network status The status of the station that is connected to WIZ630wi is shown. The surrounding wireless AP’s status are shown.. Type Type Description Description Type Type Description Description...
Serial to LAN operation mode. ( Client Mode recommended) - Server : waits for connection. Mode Mode Mode Mode - Client : connected to the remote server of WIZ630wi - Mixed : not recommended Server IP Server IP Server IP Server IP Enter the IP address for WIZ630wi setting.
Main Port For example: In-come LAN Data : “abcdegf” Output data to Serial Port : “!MAIN!abcdegf” Before sending data from Aux port to serial port, WIZ630wi added a TAG in the front of payload. Aux Port Aux Port Aux Port...
Port forwarding Port forwarding When a computer on the internet sends data to the external IP address of the router (WIZ630wi), the router (WIZ630wi) needs to know what to do with the data. Port Forwarding simply tells the WIZ630wi which computer on the local area network to send the data to. When you have port forwarding rules set up, your router takes the data off of the external IP address:port number and sends that data to an internal IP address:port number.
7.3 Packet Packet filtering filtering Packet Packet filtering filtering WIZ630wi can accept or block Internet packets according to pre-defined MAC or IP address First, please do basic settings Type Type Type Type Description Description Description Description Source MAC Source MAC...
Description Description Remote management Remote management Remote management Remote management Settings about accessing methods from WAN to WIZ630wi’s embedded web server Telnet management Telnet management Telnet management Telnet management Settings about accessing methods from WAN to WIZ630wi’s telnet Ping from WAN Filter...
To use DynDNS, users should go to www.dyndns.org to create user name and domain name. And then, set related configurations by using WIZ630wi’s webpage. Similarly, to use freeDNS zoneedit, or no-ip,users should go to their homepage first to create user name and domain name.
Station Station Mode setting Mode setting WIZ630wi works as a WiFi client(station) which is always paired with a WiFi AP. Users can take Client Mode as an opposite of Gateway Mode 9.1 Client Mode Setting Client Mode Setting Client Mode Setting...
Direct Link Setu Direct Link Setup p p p Direct Link Setu Direct Link Setu In order to use Direct Link function, the AP connected to WIZ630wi and the Station to be connected must support Direct Link function. MAC Address MAC Address...
One module operates as both AP and Station. The wireless module connects to a different AP and functions as WAN port. The channel of WIZ630wi must be identical to the channel of AP to be connected Support wireless bridge. 10.1 AP 10.1...
WIZnet assumes no responsibilities or liabilities for the use of any of its products, conveys no license or title under any patent, copyright or mask work rights to these products, and makes no representations or warranties that these products are free from patent, copyright or mask work infringement, unless otherwise specified.