Serial Control Command; W7500S2E-R1 Serial To Ethernet Module - Wiznet W7500S2E-R1 User Manual

15 bytes.

6.4.4 Serial control command

6.4.4.1 Serial interface 1 parameters (AT+COM1)
Command format
AT+COM1=[baud],[datab],[parity],[stopb],[c]\r\n
AT+NETBIOS?\r\n
Return value
6.4.4.2 Baud Rate (AT+C1_BAUD)
Command format
AT+C1_BAUD=<baud>\r\n
AT+C1_BAUD?\r\n
Return value
6.4.4.3 Data bit (AT+C1_DATAB)
Command format
AT+C1_DATAB=<datab>\r\n
AT+C1_DATAB?\r\n
Return value
6.4.4.4 Stop bit (AT+C1_STOPB)
Command format
AT+C1_STOPB=<stopb>\r\n
AT+C1_STOPB?\r\n
Return value
6.4.4.5 Parity bit (AT+C1_PARITY)
Command format
AT+C1_PARITY=<parity>\r\n
AT+C1_PARITY?\r\n
W7500S2E-R1 user manual

W7500S2E-R1 serial to Ethernet module

Parameters
<baud>
0: 300; 1: 600; 2: 1200; 3: 2400; 4: 4800;
5: 9600; 6: 14400; 7: 19200; 8: 38400; 9: 56000; 10:
57600; 11: 115200 (Default); 12: 128000;
13: 230400; 14: 256000; 15: 460800
[C1_BAUD] Value is: <baud>\r\n
Parameters
<datab>
0: 7 bit
1: 8 bit (default)
[C1_DATAB] Value is: <datab>\r\n
Parameters
<stopb>
0: 1 bit (default)
1: 2 bit
[C1_STOPB] Value is: <stopb>\r\n
Parameters
<parity>
0: none (default)
1: Odd
2: Even
28
Parameters
[baud]: Refer to AT+C1_BAUD;
[datab]: Refer to AT+C1_DATAB;
[parity]: Refer to AT+C1_PARITY;
[stopb]: Refer to AT+C1_STOPB;
[c]: Refer to AT+C1_SER_C
[COM1] Value is: [baud],[datab],[parity],[stopb],[c]\r\n
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Function value
Define new value
Query current value