Wiznet W7500S2E-R1 User Manual page 28

6.4.3.4 Device password (AT+PASS)
Command format
AT+PASS=<pass>\r\n
AT+PASS?\r\n
Return value
6.4.3.5 Device IP address (AT+IP)
Command format
AT+IP=<ip>\r\n
AT+IP?\r\n
Return value
W5500S2E-Z1 support IP address format is separate in 4 sections; each section is a decimal value and using a dot
to separate. The value range for each section is 0-255 therefore the maximum value size for IP address is 15 bytes.
This command could not accept xxx.xxx.xxx.0 or xxx.xxx.xxx.255 value inputs.
6.4.3.6 Local port number (AT+C1_PORT)
Command format
AT+C1_PORT=<port>\r\n
AT+C1_PORT?\r\n
Return value
This command defines port number of the module. It is required to use under TCP server and UDP modes. The
module will use this port number to communicate with other devices. The value range is 0 to 65535 (Port 80 is
default port for web page configuration. Please avoid using this port number.)
6.4.3.7 Local port binding (AT+C1_BIND)
Command format
AT+C1_BIND=<bind>\r\n
AT+C1_BIND?\r\n
Return value
Only available on TCP client mode.
6.4.3.8 Device subnet mask (AT+MARK)
Command format
AT+MARK=<mark>\r\n
AT+MARK?\r\n
Return value
Subnet mask format is separate in 4 sections; each section is a decimal value and using a dot to separate. The
W7500S2E-R1 user manual
Parameters
<pass>
Device Password: It only accepts numbers, alphabets or
the combination of both. It does not accept blank as input.
Maximum input length: 16 bytes, Default: admin
[PASS] Value is: <pass>\r\nOK\r\n
Parameters
<ip>
Device IP address, default: 192.168.1.88
[IP] Value is: <ip>\r\nOK\r\n
Parameters
<port>
Local port number, Default: 5000
[C1_PORT] Value is: <port>\r\nOK\r\n
Parameters
<bind>
0: Disable binding local port number
1: Enable binding local port number
[C1_BIND] Value is: <bind>\r\nOK\r\n
Parameters
<mark>
Device subnet mask, default: 255.255.255.0
[MARK] Value is: <mark>\r\nOK\r\n
24
W7500S2E-R1 serial to Ethernet module
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Function features
Define new value
Query current value