Wiznet W7500S2E-R1 User Manual page 29

value range for each section is 0-255 therefore the maximum value size for subnet mask is 15 bytes.
6.4.3.9 Device gateway (AT+GATEWAY)
Command format
AT+GATEWAY=<gateway>\r\n
AT+GATEWAY?\r\n
Return value
This subnet mask format is separate in 4 sections; each section is a decimal value and using a dot to separate. The
value range for each section is 0-255 therefore the maximum value size for Gateway address is 15 bytes. This
command could not accept xxx.xxx.xxx.0 or xxx.xxx.xxx.255 value inputs.
6.4.3.10 Operating mode (AT+C1_OP)
Command format
AT+C1_OP=<mode>\r\n
AT+C1_OP?\r\n
Return value
6.4.3.11 Start Mode (AT+START_MODE)
Command format
AT+START_MODE =<mode>\r\n
AT+START_MODE?\r\n
Return value
6.4.3.12 Remote host IP address (AT+C1_CLI_IP1)
Command format
AT+C1_CLI_IP1=<ip>\r\n
AT+C1_CLI_IP1?\r\n
Return value
Remote host IP address command sets the IP address that communicates with WIZS2E module. This command
will only available for TCP client and UDP mode.
6.4.3.13 Remote host post number (AT+C1_CLI_PP1)
Command format
AT+C1_CLI_PP1=<port>\r\n
AT+C1_CLI_PP1?\r\n
Return value
Remote host port number command sets the port number that communicates with WIZS2E module. The value
range is 0 to 65535 (Port 80 has used for web port. Please avoid using this port number.) This command will only
W7500S2E-R1 user manual
Parameters
<gateway>
Device gateway, default: 192.168.1.1
[GATEWAY] Value is: <gateway>\r\nOK\r\n
Parameters
<mode>
0: TCP server (default)
1: TCP Client;
2: UDP
[C1_OP] Value is: <mode>\r\nOK\r\n
<mode>
0: AT command mode (default);
1: Data transmission mode
[START_MODE] Value is: <mode>\r\nOK\r\n
Parameters
<ip>
Remote host IP address, default: 192.168.1.99
[C1_CLI_IP1] Value is: <ip>\r\nOK\r\n
Parameters
<port>
Remote host port number, default: 5000
[C1_CLI_PP1] Value is: <port>\r\nOK\r\n
25
W7500S2E-R1 serial to Ethernet module
Parameters
Usage
Define new value
Query current value
Function feature
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value
Usage
Define new value
Query current value