Hardware Factory Reset Method; Firmware Upgrade - Wiznet W7500S2E-R1 User Manual

W7500S2E-R1 serial to Ethernet module

5.4.3 Hardware factory reset method

5.4.3.1 Factory reset through evaluation board
Figure 5-2 The evaluation board reset button
After providing power to the module, please press the DEFAULT button for more than 3 seconds
to apply factory reset procedure.
5.4.3.2 Factory reset through module
Figure 5-3 through the module default PIN to restore factory settings
W7500S2E-R1 has a restored factory set PIN. After power on the module, pull down the
DEFAULT pin for 3 seconds to activate factory default.

5.5 Firmware Upgrade

W7500S2E-R1 supports host computer firmware upgrade. For detail information, please refer
section 8 Firmware upgrade.
W7500S2E-R1 user manual
16