Device Management - Wiznet W7500S2E-R1 User Manual

W7500S2E-R1 serial to Ethernet module
received data"
Clear Buffer if Connect: If a disconnection has created in the period of data communication,
serial buffer may still contain some data that didn't send out. After the module has reconnect
with the remote host, this command could handle usage of those remaining data in serial
interface. default: uncheck (disable)
Debug Message Enable: Shows debug message information, default: checked (enable).
AT Echo Enable: Echo means WIZS2E module could directly return the input values to the
serial interface. Thus, this option may help some users working more easily through serial
terminal software. However, this may cause trouble if the serial is connected to an embedded
system. Turning off this function may help. Default: checked (enable)

7.4 Device management

Clicking "Management" to get into device management page as figure 7-9, this page contains 2
sections.
Figure 7-9 device management page
Password setting
Old Password: the old password, default: admin
New Password: Enter new password, maximum for 15 bytes, it needs to be numbers, alphabets
or the combination of both. It does not accept blank as input value.
Confirm Password: Re-enter the new password
Set: Submit button for renewing password, when current password and the new passwords are
correct, it shows a prompt window for password changed confirmation. Please check "OK" and
back to login page.
W7500S2E-R1 user manual
40