Appendix 1-1-2 Handling Printed Circuit Board Inside Unit - Fuji Electric NA0AX06-MR User Manual

Appendix 1 Unit Handling Procedure

Appendix 1-1-2 Handling Printed circuit board inside unit

(1) How to remove the printed circuit board
1) The image below shows the unit with the upper cover removed.
2) The printed board is fixed at the printed board fixing hole of the lower case.
3) Pull the upper part of the lower case rightward and leftward, detach the printed board from the fixing hole, and then, pull
it out slowly.
(2) How to mount the printed circuit board
To mount the printed circuit board, reverse the order of removal described in (1).
Notes:
Before mounting/removing the upper cover or handling the printed circuit board, be sure to eliminate static electricity.
App.1-3