Acs Selection Group N; Acs Selection Group O - Notifier NFS-640 Programming Manual
Fire alarm control panel
Hide thumbs
Also See for NFS-640:
- Installation manual (88 pages) ,
- Manual (9 pages) ,
- Operation manual (88 pages)
Table of Contents
Advertisement
2. Program Change
ACS Selection Group N
This group is the same as Group A ( See Table 13 on page 35 ), with the following exceptions:
ACS Selection Group O
This group is the same as Group A ( See Table 13 on page 35 ), with the following exceptions:
40
www.PDF-Zoo.com
•
It should be selected only for TM-4s used for remote station communication.
•
Selection Group N follows the alarm relay for annunciation (Selection Group A annunciates
immediately).
•
The yellow LED of annunciator point 2 is for Alarm Silence only (in Selection Group A it is
for Signal Silenced).
•
It should be selected for only for TM-4s used as Fire Municipal Box Trip outputs.
•
Selection Group O provides a "Master Box" trouble displayed at the panel.
•
Selection Group O follows the alarm relay for annunciation (Selection Group A annunciates
immediately).
•
The yellow LED of annunciator point 2 is for Alarm Silence only (in Selection Group A it is
for Signal Silenced).
How to Use the Basic Program
NFS-640 Programming Manual P/N 51333:B 10/03/2003
Advertisement
Table of Contents
