How To Change A Password (3= Passwd ) - Notifier NFS-640 Programming Manual

2. Program Change
How to Change a Password (3=
To change a password, follow the instructions below:
A Forgotten Password?
If a password is entered incorrectly, the panel will respond by displaying an
message and a code. The programmer may hit escape and reenter the password correctly. However, if
the password has been forgotten, record the code and contact Notifier. After proper authentication, the
original password can be determined by deciphering the code. An example of an
display is given below:
26
www.PDF-Zoo.com
Password Change lets you select a custom Program Change (high level) or Status
Change (low level) password. From the "Basic Program" screen, press the 3 key
Program Change
to display the "Change Password" screen.
Password
.
CHANGE PASSWORD
#,NNNNN, E=STATUS
Entry area for new password
To
Change the Program Change
password
Change the Status Change
password
Save the password
Leave the Change Password screen
without changing a password
INCORRECT PASSWORD
PROGRAM: 9066-21F5-7D78-5FA4-6163
)
PASSWD
*,NNNNN,E=PROGRAM
Press Then
Enter the new Program Change
password. Use five digits, no characters.
Enter the new Status Change password.
Use five digits, no characters.
The Verify Password screen appears.
Press
The Basic Program screen appears.
Code
NFS-640 Programming Manual P/N 51333:B 10/03/2003
How to Use the Basic Program
to verify.
ENTER
INCORRECT PASSWORD
INCORRECT PASSWORD