Installing A Mini Pcie Card - DFI VP101-BT Installation Manual

Hide thumbs Also See for VP101-BT:

Table of Contents

Installing a Mini PCIe Card

The system board is equipped with 3 Mini PCIe slots: two full-size and one half-

size slots. Here we will demonstrate the installation of a half-size Mini PCIe card

(PCIe/USB/LPC

signals) for WiFi connection.

1. Grasp the Mini PCIe card by its edges and align the notch in the connector of

the card with the notch in the connector on the system board.

2. Push the Mini PCIe card down and use the provided mounting screws to se-

cure the card on the system board.

Note:

The system also has two additional full-size Mini PCIe slots that use PCIe (PCIe/

USB/3G/GPRS/CANbus signals) and mSATA (SATA signals) interfaces.

Mounting screw

Table of Contents