Table of Contents
Advertisement
Installing a Mini PCIe Card
The system board is equipped with one Mini PCIe slot that supports
mSATA and PCIe interfaces. Use the following procedure to install a Mini
PCIe card:
Align the notch in the connector of the PCIe card with the key in the
connector on the system board and use the provided mounting screws to
secure the card on the system board.
Note:
The Mini PCIe socket supports PCIe and SATA signals and can accommodate
common mobile broadband and storage modules. For jumper settings on switching
the signal betwen SATA and PCIe, refer to "Board Layout and Jumper Settings."
6
Mini PCIe card
Mounting screw
Advertisement
Table of Contents
