Table of Contents
Advertisement
EMBROIDERY APPLICATIONS
m
Press
.
n
Embroider the rest of the section following
m
the step
on page 138 through step
page 141 of "Connecting Three Patterns".
134
Embroidering Split Embroidery
Patterns
Split embroidery patterns created with PE-DESIGN
Ver.7 or later can be embroidered. With split
embroidery patterns, embroidery designs larger
than the embroidery hoop are divided into
multiple sections, which combine to create a
single pattern after each section is embroidered.
For details on creating split embroidery patterns
and for more detailed embroidering instructions,
refer to the operation manual included with PE-
DESIGN Ver.7 or later.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media/SD card and embroider it.
s
on
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
*
For details on recalling patterns, refer to "Recalling
from USB Media/SD card" on page 117.
A screen appears so that a section of the split
embroidery pattern can be selected.
Advertisement
Table of Contents
